Crochet Pattern
38. White Mittens With Bobbles And Leaves
2013-09-28, by Jolanta Gustafsson
Yarn: 75 % wool, 100 g = approx 260 m
Yarn Amount: approx 260 g
Crochet Hook: 4 mm or size needed to obtain the gauge
Gauge: 24 double crochet stitches and 13 rounds = 10 cm
Size: Woman's M
Measurements: 20/22 cm around above/below thumb, 26 cm long
Skill Level: Experienced
Abbreviations:
st(s), ch(s), sl st – stitch(es), chain/chain stitch(es), slip stitch
sc, hdc, dc – single crochet, half double crochet, double crochet
3 dc – work the indicated amount of stitches each in next stitch
(2 dc) – work all the stitches within parentheses in next stitch or as directed
[2 st] – work all the stitches within brackets each in next stitch decreasing them into 1 stitch
pff – puff: work 2 double crochet together inserting the hook into the same stitch
s-dc – side double crochet: work 2 double crochet together inserting the hook into the same stitch (same as pff)
sk 8 – skip the indicated amount of stitches
{ } – repeat instructions within braces as many times as directed
/ – the number after slash symbol shows the amount of stitches for the round; chain stitches at the beginning of the round and slip stitch at the end of the round are not included
leaf – ch 8, 1 sc in second ch from hook, 1 hdc, 1 dc, 1 pff, 1 dc, 1 hdc, 1 sl st
dc with bobble – work a double crochet stitch; then ch 1, turn and work into the double crochet: 1 unfinished double crochet, 4 unfinished treble crochet and 1 unfinished double crochet – there are 7 loops on the hook now, yarn over and pull it through all 7 loops; insert hook into the same double crochet once again, turn the work so that the yarn is carried at the back of the work, yarn over and work as a slip stich; sc with bobble and hdc with bobble are worked similarly
dc behind bobble – work a double crochet stitch inserting the hook under 2 threads on the back side of the bobble; hdc behind bobble is worked similarly
Edging
Round 1: { ch 1, leaf, ch 1 } 16 times.
Round 2: ch 1, start working into second ch from hook, { 1 sc, 1 sc into first ch of the leaf, 1 sc } 16 times, join the ends of the edging into a circle with sl st in first sc. / 48 sc
Mitten
Work in rounds with a jump between rounds unless otherwise stated.
Round 3: ch 1, { 1 sc, 1 sc with bobble, 1 sc } 16 times, sl st in first sc on working round. / 48 sc
Round 4: ch 2, { 1 dc, 1 dc behind bobble, 1 dc } 16 times, sl st in first dc on working round. / 48 dc
Round 5: ch 2, 48 dc, sl st in first dc on working round. / 48 dc
Rounds 6-8: Repeat round 5.
Round 9: Turn the work and work to the opposite direction with the inside facing you. Ch 1, { 2 sc, leaf, 1 sc } 16 times, sl st in first sc on working round.
Round 10: Turn the work and work with the right side facing you. Ch 1, { 1 sc, sk leaf, 2 sc } 16 times, sl st in first sc on working round. / 48 sc
Rounds 11-13: Same as rounds 3-5.
Rounds 14-18 for left mitten:
Round 14: ch 2, 18 dc, (2 dc), 29 dc, sl st in first dc on working round. / 49 dc
Round 15: ch 2, 18 dc, (2 dc), 30 dc, sl st in first dc on working round. / 50 dc
Round 16: ch 2, 18 dc, (2 dc), 31 dc, sl st in first dc on working round. / 51 dc
Round 17: ch 2, 18 dc, (2 dc), 32 dc, sl st in first dc on working round. / 52 dc
Round 18: ch 2, 18 dc, 1 s-dc, ch 4, sk 8, 1 s-dc, 24 dc, sl st in first dc on working round. / 48 sts
Rounds 14-18 for right mitten:
Round 14: ch 2, 29 dc, (2 dc), 18 dc, sl st in first dc on working round. / 49 dc
Round 15: ch 2, 30 dc, (2 dc), 18 dc, sl st in first dc on working round. / 50 dc
Round 16: ch 2, 31 dc, (2 dc), 18 dc, sl st in first dc on working round. / 51 dc
Round 17: ch 2, 32 dc, (2 dc), 18 dc, sl st in first dc on working round. / 52 dc
Round 18: ch 2, 24 dc, 1 s-dc, ch 4, sk 8, 1 s-dc, 18 dc, sl st in first dc on working round. / 48 sts
Rounds 19-22: Repeat round 5.
Rounds 23-28 for left mitten:
Round 23: ch 2, 24 dc, 10 dc, 1 dc with bobble, 1 dc, 1 dc with bobble, 11 dc, sl st in first dc on working round. / 48 dc
Round 24: ch 2, 24 dc, 9 dc, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 10 dc, sl st in first dc on working round. / 48 sts
Round 25: ch 2, [2 dc], 22 dc, [2 dc], 7 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 10 dc, sl st in first dc on working round. / 46 sts
Round 26: ch 2, 21 dc, [2 dc], 8 dc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 8 dc, [2 dc], sl st in first dc on working round. / 44 sts
Round 27: ch 2, 22 dc, 9 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 10 dc, sl st in first dc on working round. / 44 sts
Round 28: ch 2, [2 dc], 20 dc, [2 dc], 7 dc, 1 dc behind bobble, 1 dc, 1 dc behind bobble, 10 dc, sl st in first dc on working round. / 42 sts
Rounds 23-28 for right mitten:
Round 23: ch 2, 11 dc, 1 dc with bobble, 1 dc, 1 dc with bobble, 10 dc, 24 dc, sl st in first dc on working round. / 48 sts
Round 24: ch 2, 10 dc, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 9 dc, 24 dc, sl st in first dc on working round. / 48 sts
Round 25: ch 2, [2 dc], 8 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 9 dc, [2 dc], 22 dc, sl st in first dc on working round. / 46 sts
Round 26: ch 2, 9 dc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 7 dc, [2 dc], 21 dc, [2 dc], sl st in first dc on working round. / 44 sts
Round 27: ch 2, 10 dc, 1 hdc with bobble, 1 hdc, 1 hst with bobble, 9 dc, 22 dc, sl st in first dc on working round. / 44 sts
Round 28: ch 2, [2 dc], 8 dc, 1 dc behind bobble, 1 dc, 1 dc behind bobble, 9 dc, [2 dc ], 20 dc, sl st in first dc on working round. / 42 sts
Round 29: ch 2, { 19 dc, [2 dc] } twice, sl st in first dc on working round. / 40 sts
Round 30: ch 2, { [2 dc], 16 dc, [2 dc] } twice, sl st in first dc on working round. / 36 sts
Round 31: ch 2, { [2 dc], 14 dc, [2 dc] } twice, sl st in first dc on working round. / 32 sts
Round 32: ch 2, { [2 dc], 12 dc, [2 dc] } twice, sl st in first dc on working round. / 28 sts
Round 33: ch 2, { [2 dc], [2 dc], 6 dc, [2 dc], [2 dc] } twice, sl st in first dc on working round. / 20 sts
Round 34: { [2 dc] } 10 times, sl st in first dc on working round. / 10 sts
Leave the remaining loop on the hook. Pick up 4 loops by inserting the hook into 2nd to 5th dc on the last round and pulling up the yarn through these stitches like in Tunisian crochet. Move all loops onto double-pointed needle. Pick up 5 loops more in the same way inserting the hook into 6th to 10th dc. Cut the yarn, thread it through all loops and pull it firmly to tighten the opening. Fasten off on the inside and weave in the end.
Thumb
The thumb is worked in rounds in double crochet stitches with a jump between rounds. Start crocheting the thumb on the right side of thumb opening for left mitten, and on the left side of thumb opening for right mitten. While working into double crochet stitches on round 19 insert the hook into the bottom of stitches under at least 2 threads.
Round 1 for left thumb: Attach the yarn in the middle of first s-dc on round 18, ch 2, 1 dc in same s-dc where the yarn was attached, [1 dc in 19th dc and 1 dc in 20th dc on round 17], 6 dc in 21st to 26th dc on round 17, [1 dc in 27th dc and 1 dc in 28th dc on round 17], 2 dc in second s-dc on round 18, [1 dc in 24th dc and 1 dc in 23rd dc on round 19], 2 dc in 22nd to 21st dc on round 19, [1 dc in 20th dc and 1 dc in 19th dc on round 19], 1 dc in first s-dc on round 18, sl st in first dc on working round. / 16 sts
Round 1 for right thumb: Attach the yarn in the middle of second s-dc on round 18, ch 2, 1 dc in same s-dc where the yarn was attached, [1 dc in 30th dc and 1 dc in 29th dc on round 19], 2 dc in 28th to 27th dc on round 19, [1 dc in 26th dc and 1 dc in 25th dc on round 19], 2 dc in first s-dc on round 18, [1 dc in 25th dc and 1 dc in 26th dc on round 17], 6 dc in 27th to 32nd dc on round 17, [1 dc in 33rd dc and 1 dc in 34th dc on round 17], 1 dc in second s-dc on round 18, sl st in first dc on working round. / 16 sts
Round 2: ch 2, 16 dc, sl st in first dc on working round.
Rounds 3-6: Repeat round 2.
Round 7: ch 2, { [2 dc] } 8 times, sl st in first dc on working round. / 8 sts
Close the opening using the same method as described for the mitten. Fasten off and weave in all ends. Block the mittens so that the details get the right shape.
Good Luck And Happy Crocheting!
Yarn Amount: approx 260 g
Crochet Hook: 4 mm or size needed to obtain the gauge
Gauge: 24 double crochet stitches and 13 rounds = 10 cm
Size: Woman's M
Measurements: 20/22 cm around above/below thumb, 26 cm long
Skill Level: Experienced
Abbreviations:
st(s), ch(s), sl st – stitch(es), chain/chain stitch(es), slip stitch
sc, hdc, dc – single crochet, half double crochet, double crochet
3 dc – work the indicated amount of stitches each in next stitch
(2 dc) – work all the stitches within parentheses in next stitch or as directed
[2 st] – work all the stitches within brackets each in next stitch decreasing them into 1 stitch
pff – puff: work 2 double crochet together inserting the hook into the same stitch
s-dc – side double crochet: work 2 double crochet together inserting the hook into the same stitch (same as pff)
sk 8 – skip the indicated amount of stitches
{ } – repeat instructions within braces as many times as directed
/ – the number after slash symbol shows the amount of stitches for the round; chain stitches at the beginning of the round and slip stitch at the end of the round are not included
leaf – ch 8, 1 sc in second ch from hook, 1 hdc, 1 dc, 1 pff, 1 dc, 1 hdc, 1 sl st
dc with bobble – work a double crochet stitch; then ch 1, turn and work into the double crochet: 1 unfinished double crochet, 4 unfinished treble crochet and 1 unfinished double crochet – there are 7 loops on the hook now, yarn over and pull it through all 7 loops; insert hook into the same double crochet once again, turn the work so that the yarn is carried at the back of the work, yarn over and work as a slip stich; sc with bobble and hdc with bobble are worked similarly
dc behind bobble – work a double crochet stitch inserting the hook under 2 threads on the back side of the bobble; hdc behind bobble is worked similarly
Edging
Round 1: { ch 1, leaf, ch 1 } 16 times.
Round 2: ch 1, start working into second ch from hook, { 1 sc, 1 sc into first ch of the leaf, 1 sc } 16 times, join the ends of the edging into a circle with sl st in first sc. / 48 sc
Mitten
Work in rounds with a jump between rounds unless otherwise stated.
Round 3: ch 1, { 1 sc, 1 sc with bobble, 1 sc } 16 times, sl st in first sc on working round. / 48 sc
Round 4: ch 2, { 1 dc, 1 dc behind bobble, 1 dc } 16 times, sl st in first dc on working round. / 48 dc
Round 5: ch 2, 48 dc, sl st in first dc on working round. / 48 dc
Rounds 6-8: Repeat round 5.
Round 9: Turn the work and work to the opposite direction with the inside facing you. Ch 1, { 2 sc, leaf, 1 sc } 16 times, sl st in first sc on working round.
Round 10: Turn the work and work with the right side facing you. Ch 1, { 1 sc, sk leaf, 2 sc } 16 times, sl st in first sc on working round. / 48 sc
Rounds 11-13: Same as rounds 3-5.
Rounds 14-18 for left mitten:
Round 14: ch 2, 18 dc, (2 dc), 29 dc, sl st in first dc on working round. / 49 dc
Round 15: ch 2, 18 dc, (2 dc), 30 dc, sl st in first dc on working round. / 50 dc
Round 16: ch 2, 18 dc, (2 dc), 31 dc, sl st in first dc on working round. / 51 dc
Round 17: ch 2, 18 dc, (2 dc), 32 dc, sl st in first dc on working round. / 52 dc
Round 18: ch 2, 18 dc, 1 s-dc, ch 4, sk 8, 1 s-dc, 24 dc, sl st in first dc on working round. / 48 sts
Rounds 14-18 for right mitten:
Round 14: ch 2, 29 dc, (2 dc), 18 dc, sl st in first dc on working round. / 49 dc
Round 15: ch 2, 30 dc, (2 dc), 18 dc, sl st in first dc on working round. / 50 dc
Round 16: ch 2, 31 dc, (2 dc), 18 dc, sl st in first dc on working round. / 51 dc
Round 17: ch 2, 32 dc, (2 dc), 18 dc, sl st in first dc on working round. / 52 dc
Round 18: ch 2, 24 dc, 1 s-dc, ch 4, sk 8, 1 s-dc, 18 dc, sl st in first dc on working round. / 48 sts
Rounds 19-22: Repeat round 5.
Rounds 23-28 for left mitten:
Round 23: ch 2, 24 dc, 10 dc, 1 dc with bobble, 1 dc, 1 dc with bobble, 11 dc, sl st in first dc on working round. / 48 dc
Round 24: ch 2, 24 dc, 9 dc, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 10 dc, sl st in first dc on working round. / 48 sts
Round 25: ch 2, [2 dc], 22 dc, [2 dc], 7 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 10 dc, sl st in first dc on working round. / 46 sts
Round 26: ch 2, 21 dc, [2 dc], 8 dc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 8 dc, [2 dc], sl st in first dc on working round. / 44 sts
Round 27: ch 2, 22 dc, 9 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 10 dc, sl st in first dc on working round. / 44 sts
Round 28: ch 2, [2 dc], 20 dc, [2 dc], 7 dc, 1 dc behind bobble, 1 dc, 1 dc behind bobble, 10 dc, sl st in first dc on working round. / 42 sts
Rounds 23-28 for right mitten:
Round 23: ch 2, 11 dc, 1 dc with bobble, 1 dc, 1 dc with bobble, 10 dc, 24 dc, sl st in first dc on working round. / 48 sts
Round 24: ch 2, 10 dc, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 9 dc, 24 dc, sl st in first dc on working round. / 48 sts
Round 25: ch 2, [2 dc], 8 dc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 1 hdc, 1 hdc with bobble, 9 dc, [2 dc], 22 dc, sl st in first dc on working round. / 46 sts
Round 26: ch 2, 9 dc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 1 hdc, 1 hdc behind bobble, 7 dc, [2 dc], 21 dc, [2 dc], sl st in first dc on working round. / 44 sts
Round 27: ch 2, 10 dc, 1 hdc with bobble, 1 hdc, 1 hst with bobble, 9 dc, 22 dc, sl st in first dc on working round. / 44 sts
Round 28: ch 2, [2 dc], 8 dc, 1 dc behind bobble, 1 dc, 1 dc behind bobble, 9 dc, [2 dc ], 20 dc, sl st in first dc on working round. / 42 sts
Round 29: ch 2, { 19 dc, [2 dc] } twice, sl st in first dc on working round. / 40 sts
Round 30: ch 2, { [2 dc], 16 dc, [2 dc] } twice, sl st in first dc on working round. / 36 sts
Round 31: ch 2, { [2 dc], 14 dc, [2 dc] } twice, sl st in first dc on working round. / 32 sts
Round 32: ch 2, { [2 dc], 12 dc, [2 dc] } twice, sl st in first dc on working round. / 28 sts
Round 33: ch 2, { [2 dc], [2 dc], 6 dc, [2 dc], [2 dc] } twice, sl st in first dc on working round. / 20 sts
Round 34: { [2 dc] } 10 times, sl st in first dc on working round. / 10 sts
Leave the remaining loop on the hook. Pick up 4 loops by inserting the hook into 2nd to 5th dc on the last round and pulling up the yarn through these stitches like in Tunisian crochet. Move all loops onto double-pointed needle. Pick up 5 loops more in the same way inserting the hook into 6th to 10th dc. Cut the yarn, thread it through all loops and pull it firmly to tighten the opening. Fasten off on the inside and weave in the end.
Thumb
The thumb is worked in rounds in double crochet stitches with a jump between rounds. Start crocheting the thumb on the right side of thumb opening for left mitten, and on the left side of thumb opening for right mitten. While working into double crochet stitches on round 19 insert the hook into the bottom of stitches under at least 2 threads.
Round 1 for left thumb: Attach the yarn in the middle of first s-dc on round 18, ch 2, 1 dc in same s-dc where the yarn was attached, [1 dc in 19th dc and 1 dc in 20th dc on round 17], 6 dc in 21st to 26th dc on round 17, [1 dc in 27th dc and 1 dc in 28th dc on round 17], 2 dc in second s-dc on round 18, [1 dc in 24th dc and 1 dc in 23rd dc on round 19], 2 dc in 22nd to 21st dc on round 19, [1 dc in 20th dc and 1 dc in 19th dc on round 19], 1 dc in first s-dc on round 18, sl st in first dc on working round. / 16 sts
Round 1 for right thumb: Attach the yarn in the middle of second s-dc on round 18, ch 2, 1 dc in same s-dc where the yarn was attached, [1 dc in 30th dc and 1 dc in 29th dc on round 19], 2 dc in 28th to 27th dc on round 19, [1 dc in 26th dc and 1 dc in 25th dc on round 19], 2 dc in first s-dc on round 18, [1 dc in 25th dc and 1 dc in 26th dc on round 17], 6 dc in 27th to 32nd dc on round 17, [1 dc in 33rd dc and 1 dc in 34th dc on round 17], 1 dc in second s-dc on round 18, sl st in first dc on working round. / 16 sts
Round 2: ch 2, 16 dc, sl st in first dc on working round.
Rounds 3-6: Repeat round 2.
Round 7: ch 2, { [2 dc] } 8 times, sl st in first dc on working round. / 8 sts
Close the opening using the same method as described for the mitten. Fasten off and weave in all ends. Block the mittens so that the details get the right shape.
Good Luck And Happy Crocheting!